HALFcamber65 – HALFcamber places camber where it is absolutely necessary and gradual rocker everywhere else. The result is maximum glide, maneuverability and edge control. HALFcamber65 features camber underfoot on 65% of the deck.

PROflex (1 Soft - 10 Stiff) – 146cm: 5 // 150cm: 5 // 154cm: 6 // 158cm: 7 // 162cm: 7

PERFECTpivot 2.0 – Every Cardiff snowboard is uniquely designed to match the shape to the camber - resulting in a new standard of performance.

146 and 150: 12mm of taper

154, 158 and 162: 20mm of taper

CARBONcore – Cardiff Enduro cores feature a poplar-paulownia construction with vertical layers of carbon fiber in-between. This simple detail helps the core retain its shape for years.

TRIAXglass – Two layers of triaxial fiberglass above and below the core

UNIwall – Seamless urethane sidewalls fuse to cores to create the most durable and damp ride available - featured on Enduro Series decks.

BOARDERpatrol Technology – BOARDERpatrol technology uses poplar stringers which fuse with the UNIwall seamless urethane sidewall to reinforce the edge and provide an incredibly damp ride.

RACEbase™ G – Black graphite infused sintered base for maximized glide and easy repair.

ENDUROcap – On both Enduro and Pro Carbon splitboards, Cardiff use a scratch resistant dimpled topsheet for maximum performance and protection

Art by Kyson Dana

NOVERhang – NOVERhang - Cardiff creates wider-wasted high performance boards that will accommodate larger boot sizes without toe drag... you're welcome.

Enduro Build – The Enduro build is for those that require the most durable, reliable and high performance equipment. This build features Cardiff's CARBONcore and triaxial fiberglass construction which creates a torsionally rigid ride and adds strength to the board for increased durability.

SWALEtail™ SP – Our unique recurved tails on all CARDIFF splitboards will accommodate a variety of skin tail-clips even those designed for skis

BIloba™ SP – All CARDIFF splitboards feature a chamfered inner edge of the split ski at both the tip and tail to allow for hood free touring and damage free connection

SPLITtech Optimized – All CARDIFF splitboards are optimized for both soft-boot and hard-boot touring setups. Hard-boots typically have longer sole lengths than soft-boots and hard-boot bindings such as Phantom Alphas sit lower to the surface of the splitboard. This requires a slightly wider deck underfoot, which all of our splitboards feature. Our splitboard cores are reinforced in the connection areas and bindings to handle additional forces from the metal and other hard bindings.

Spark R&D Tesla T1 Single Wire Baseplate – A single fatty wire built into the baseplate switches easily from stowed, to low (12°), to high (18°) climbing positions and back again while touring. Eliminating the second wire saves weight and fiddle time.

Hammockstrap™ – Reactstrap roots in a stitchless construction for ultra-response with minimal materials. The addition of a nylon cross spine equals a more direct connection with the board.

Flex Slider – Makes the ankle straps move out of the way so you can step into the binding without obstruction. Burton's Flex Slider has a Limited Lifetime Warranty.

Supergrip Capstrap™ 2.0 – This minimalist design merges two materials into one technologically advanced toe strap. A firmer material in the spine provides a supportive and lightweight skeleton, while a softer over-molded material improves boot wrap and comfort.

Double Take Buckles w/ Insta-Click – Be the first to drop in with the rapid ratcheting of Burton's Double Take Buckles. Helical teeth and "Insta-Click" engagement combine for increased torque per crank, faster uptake, and fewer cranks to tightness. The result: vastly improved strength, speed, and ease-of-use.

Quick-Adjust FLAD™ – Burton's tool-free forward lean adjustment.

Burton-Designed Single-Component Negative Lean Hi-Back – The simplicity of a one-piece hi-back means immediate response. Through material blends we then manipulate the overall flex profile—from buttery to responsive.

True OTT Hi-Back Padding – Wrapping the upper portion of the hi-back with padding eliminates pesky pressure points.

Mounts directly to 2015 and newer Burton splitboards without any additional hardware needed.

To mount the Hitchhiker Binding to any other splitboard, you must purchase additional hardware, such as Spark R&D Spark Pucks, or pucks from Voile USA. Sold separately.

Crampon Compatability – The new Tesla T1 baseplate is only compatible with the Burton Crampon and Spark Ibex Crampon.

Medium-Stiff Flex – Helps with quick, technical maneuvers, even at high speeds. Great for all-mountain carving, powerful freeriding and charging through the terrain park.

Features Re-Ground Materials to Reduce Waste